This documentation is intended for Authenticator 4 application users.
Authenticator 4 application is no longer supported on recent versions of operating systems. The current Authenticator app that we recommend installing is Authenticator 6.
To migrate from Authenticator 4 to Authenticator 6, please read the following instructions.
For the following procedure, we consider that you are an active user of the Authenticator 4 application, meaning that you have a service running with enrolled devices.
-
If the authentication mode for your service is set to “Without PIN”, please contact your inWebo administrator.
-
If you have reached the limit of allowed activated devices, please contact your inWebo administrator.
-
If you have downloaded but never used the Authenticator 4 application, we recommend you to uninstall the Authenticator 4 application. You should download the updated version, the Authenticator 6 application, from an app store.
How to migrate from Authenticator 4 to Authenticator 6?
-
Step 1: Download the Authenticator 6 application directly from an app store. To use Authenticator 6, you need an activation code.
-
Step 2: Generate an activation code:
-
Launch the Authenticator 4 application.
-
Select “Enroll another device” from the menu.
-
Enter your PIN and click on “Generate”.
-
Copy or write down the activation code.
-
-
Step 3: Activate Authenticator 6 application (first time use)
-
Launch the Authenticator 6 application.
-
Read and accept the Privacy Policy Agreement.
-
Paste or enter the previously generated activation code.
-
Enter your PIN to access your service in the Authenticator 6 application.
-
-
Step 4: You should now uninstall Authenticator 4 application from your device. The migration from Authenticator 4 to Authenticator 6 is successful.
To know more about using Authenticator 6, please refer to the “inWebo Authenticator 6, end-user Guide” documentation.